Common Concrete Sealing Mistakes and How to Avoid Them

Sealing your concrete floor properly requires knowing what can hinder your progress. Here are common concrete sealing mistakes and how to avoid them.

Modern-day concrete can last for a ridiculously long time. You may be able to get up to 50 years, if not longer, out of a concrete driveway, walkway, patio, etc.

But to get the most life possible out of concrete, you will need to seal it and keep it sealed as best you can. You'll also want to take your time while you're working through the concrete sealing process. It'll help you avoid making any crucial concrete sealing mistakes.



Would you like to learn about some of the most common concrete sealing mistakes so that you can steer clear of them? Continue reading to get the inside scoop on them prior to sealing concrete surfaces.

Failing to Clean Concrete Before Sealing It

Before you even think about sealing concrete, you're going to need to focus on preparing concrete for sealer. You shouldn't ever attempt to seal a concrete surface while there is still dirt and other debris on it.

It's obviously going to be challenging to keep a concrete surface that is outside 100% clean. But you're going to make one of the worst concrete sealing mistakes if you seal concrete that is dirty.

Outside of cleaning concrete, you should also repair any cracks and holes in it and make it a point to clean off stains, too. You're going to seal all these blemishes in if you aren't diligent about getting concrete ready for sealer.

Using the Wrong Concrete Sealer

Choosing a sealer that is going to make your concrete look amazing will be of the utmost importance. But not everyone takes the search for a sealer as seriously as they should, which can be another one of the biggest concrete sealing mistakes.

Far too often, people will run to their local home improvement stores and select the cheapest concrete sealer they can find. Then, they'll be surprised when their concrete doesn't have quite the appearance they imagined in their heads.

You should look high and low for a high-quality sealer made by a reputable company that's going to give your concrete surface the right look. You might also want to try to find a sealer that will repel the things you need it to keep away from your concrete.

Applying Concrete Sealer Unevenly

There are a couple of ways you can choose to apply sealer to concrete. You can either spray it on or roll it on depending on which kind of concrete sealer you're using.

No matter which way you decide to apply concrete sealer, you're going to want to make sure it goes down evenly. Sealer is going to dry much quicker than you might think it would, so you should work fast while paying close attention to the evenness of your sealer.

Putting Too Much Sealer on Concrete

In theory, you might think putting a lot of sealer on concrete would provide it with extra protection. But in reality, this isn't what's going to happen if you make this concrete sealing mistake.

If you put too much sealer on concrete, it's going to result in it taking a long time to dry. This could impact its long-term effectiveness and put you in a position where you'll need to apply concrete sealer again before long.

Your best bet will be to apply a thin layer of concrete sealer at first and then go back over it with another layer later. It'll give you one nice thick layer of sealer while also giving your sealer an opportunity to dry completely.

Sealing Concrete Without the Proper Protection

Working with concrete sealer could potentially put you at risk if you aren't careful. It's why you should outfit yourself with all the right gear and equipment if you ever work with it.

Some of the things you'll need to wear when you're applying concrete sealer are:

• Gloves
• Safety goggles
• Mask

You'll also need to put on heavy-duty work clothes and be ready to take those clothes off right away when you're done with concrete sealing. You don't want to subject yourself to concrete sealer fumes for any longer than necessary.

Choosing to Seal Concrete Yourself

At the end of the day, you might be able to get away with applying a concrete sealer on your own. But you'll run the risk of making one or more of the concrete sealing mistakes listed here.

In this case, the biggest mistake of all will be you deciding to seal concrete yourself in the first place. You'll wish you had called on a company with experience in this area to help you with concrete sealing.

If you'd like to avoid making any mistakes, Desert Tile & Grout Restore can serve as this company for you. We can assist you with cleaning and sealing concrete to guarantee that you're left with a concrete surface that will look fantastic and last you a very long time.

Call Us to Avoid These Concrete Sealing Mistakes

If you make any of these concrete sealing mistakes, it's going to affect the appearance of your concrete. It might also impact your concrete's durability and cause it to begin to break down sooner rather than later.

Desert Tile & Grout Restore can make sure you don't have to be concerned about making any mistakes when you work with us. We'll leave your concrete surface looking even better than you could have imagined.

Would you like to take advantage of our concrete cleaning and sealing services? Contact us today to schedule a consultation.